Specifications

6.5 RS-232 and Telnet Commands

COMMAND DESCRIPTION

PWR 0/1 Power control, 0=Off, 1=On

SOURCE 0~5 Source selection, 0=HDMI 1, 1=HDMI 2, 2=OPT,

3=COAX, 4=LINE IN, 5=RCA IN

VOL 0~80 Output volume setting, 0~80 db

MUTE 0/1 Output volume mute control, 0=Unmute, 1=Mute

MICVOL 0~30 Mic volume control, 0~30 db

MICMODE 0~4 Mic mode select, 0=Off, 1=Normal, 2=Phantom,

3=Line mode

FADEFAULT Factory default setting

REBOOT Reboot the unit

IPCONFIG Print the IP conguration to the screen

RESETIP Reset the IP conguration to factory defaults

SHOWMAC Print the MAC address to the screen

SHOWPORT Print the Telnet communication port to the screen

SIPADD Set the IP address

SNETMASK Set the Net Mask address

SGATEWAY Set the Gateway address

STELNETPORT Set the Telnet communcation port

HELP Display list of commands

H Alias for HELP

? Alias for HELP

Note: RS-232 commands will be not executed unless followed by a

carriage return. All commands are case-sensitive.