Data Sheet
Table Of Contents
- CYSBSYS-RP01, Rapid IoT Connect
- General Description
- Key Features
- Package
- Benefits
- Ordering Information
- Contents
- Overview
- Functional Block Diagram
- PSoC 6 MCU
- Dual-band 802.11ac-friendly Radio with BT 5.0
- Crystal and Oscillators
- Chip Antenna for Wi-Fi / BT and u.FL Connector
- CapSense® External Modulation and Integration Capacitors
- Mechanical Dimensions
- Castellated Pads Layout
- Recommended Host PCB Layout
- System Connections
- Castellated Pads Pin Description
- External Reset (XRES)
- Electrical Specifications
- Recommended Operating Conditions
- External ECO Specification
- Environmental Conditions
- ESD and EMI Protection
- Regulatory Information
- Packaging
- Ordering Information
- Part Numbering Convention
- Acronyms
- Document Conventions
- Sales, Solutions, and Legal Information
PRELIMINARY
CYSBSYS-RP01
Rapid IoT Connect
General Description
The SubSystems CYSBSYS-RP01 Rapid IoT Connect module
is the easiest way to provide a secure, scalable, and reliable
connection from your device to your cloud. CYSBSYS-RP01 is a
pre-certified 802.11ac-friendly dual-band (2.4 and 5.0 GHz)
Wi-Fi and Bluetooth 5.0-compliant combo radio module. The
module includes a PSoC
®
6 MCU with an Arm
®
Cortex
®
-M4F
CPU, a single-chip radio, on-board crystals, oscillators, chip
antenna, and passive components.
CYSBSYS-RP01 provides up to 51 I/Os in a 26.6 x 14.0 x 2.9
mm castellated surface-mount PCB for easy manufacturing.
When combined with Cypress SubSystems connectivity
services, CYSBSYS-RP01 is the fastest way to deploy a secure
and reliable network of IoT devices.
■ 100-MHz Arm Cortex-M4F CPU with single-cycle multiply
(Floating Point and Memory Protection Unit)
■ 512-KB application flash with 16-KB EEPROM area
■ 512-KB SRAM
■ Backup domain with 64 bytes of memory and Real-Time-Clock
(RTC)
■ Up to 51 programmable GPIO
■ Certified to FCC, ISED, and CE regulations
■ Industrial temperature range: -20 °C to +70 °C
Key Features
■ Size: 26.59 mm × 14 mm x 2.5 mm (L x W x H)
■ Weight: 15 gm
■ Dual-band 2.4-GHz/5-GHz radio
■ On-board chip antenna or external antenna variant
■ Full IEEE 802.11a/b/g/n compatibility with enhanced perfor-
mance
■ 802.11ac-friendly
[
1]
, MCS8 (256-QAM) for 20-MHz channels
Ordering Information
Note
■ Bluetooth 5.0-compliant with LE 2-Mbps data rate for Bluetooth
Low Energy
■ Supports all optional Bluetooth 4.2 features - LE Secure
Connections, LE Privacy 1.2, and LE Data Packet Length
Extensions
■ Supports BDR (1 Mbps), EDR (2 Mbps/3 Mbps), BLE
(1 Mbps/2 Mbps)
■ Adaptive frequency hopping (AFH) for reducing radio
frequency interference
Package
■ 73-pin castellated solder pads
■ 0.8-mm pitch castellated solder pads
Benefits
■ Proven, qualified, certified, and ready to use hardware design
■ Small host footprint (27.79 × 15.20 mm × 2.5 mm), perfect for
space-constrained applications
■ Castellated solder pad connections for ease-of-use
■ Fully certified module eliminates the time needed for design,
development, and certification processes
■ Flexible and programmable MCU architecture, with program-
mable digital and analog resources
■ Large non-volatile memory for complex application devel-
opment
■ Over-the-air (OTA) update-capable for development or field
updates
■ Pb-free, Halogen-free and RoHS-compliant.
1. IEEE 802.11ac full-compliance requires support for 40-MHz and 80-MHz channel bandwidths. The radio on CYSBSYS-RP01 is 802.11ac-friendly. It only supports
20-MHz channel bandwidth; however, it supports 802.11ac's 256-QAM for 20-MHz channels in the 5-GHz band, enabling it to offer higher throughput and lower energy
per bit than 802.11n-only products.
• San Jose, CA 95134-1709 • 408-943-2600
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 002-29368 Rev. *C
Revised June 19, 2020
CYSBSYS-RP01, Rapid IoT Connect
Part Number
Description
Availability
CYSBSYS-RP01
Rapid IoT Connect with on board chip antenna
Restricted sampling
CYSBSYSKIT-01
Rapid IoT Connect Platform RP01 Feather Kit
Restricted sampling