Data Sheet

PRELIMINARY
CYSBSYS-RP01
External Reset (XRES)
CYSBSYS-RP01 has an integrated power-on reset circuit, which completely resets all circuits to a known power on state. This action
can also be evoked by an external reset signal, forcing it into a power-on reset state. The XRES signal is an active LOW signal, which
is an input to the CYSBSYS-RP01 (ad 49). The CYSBSYS-RP01 module does not require an external pull-up resistor on the XRES
input.
Electrical Specifications
Absolute Maximum Ratings
Table 3. Absolute Maximum Ratings
Parameter
Description
Min
Max
Units
VABT_WL
DC supply voltage for dual-band 802.11ac-friendly radio with BT 5.0, VBAT and PA
driver supply
-0.5
+5.0
V
VDDIO_WL
DC supply voltage for digital I/O
-0.5
+2.20
V
VDDD, VBACKUP,
VDDIO0
Internal regulator and Port 1 GPIO supply for PSoC 6 MCU
Backup power and GPIO Port 0 supply when present
GPIO supply for Ports 11 to 13 when present /
Supply for eFuse Programming*
-0.5
-0.5
+2.20
+2.62
V
V
VDDA, VDDIO1,
VDDUSB
Analog power supply voltage for PSoC 6 MCU
GPIO supply for Ports 5 to 8 when present
Supply for Port 14 (USB or GPIO) when present
-0.5
+4
V
ESD_HBM
Human body model contact discharge per JEDEC EID/JESD22-A114
2200
-
V
ESD_CDM
Charged device model contact discharge per JEDEC EIA/JESD22-C101
500
-
V
Usage above the absolute maximum conditions listed in above table may cause permanent damage to the device. Exposure to
absolute maximum conditions for extended periods of time may affect device reliability. The maximum storage temperature is 150 °C
in compliance with JEDEC Standard JESD22-A103, High Temperature Storage Life. When used below absolute maximum conditions
but above normal operating conditions, the device may not operate to specification.
Document Number: 002-29368 Rev. *C Page 13 of 22