User`s manual
Table Of Contents
- Stellaris® LM3S9B96 Development Board Overview
- Stellaris® LM3S9B96 Development Board Hardware Description
- Stellaris® LM3S9B96 Development Board External Peripheral Interface (EPI)
- Using the In-Circuit Debugger Interface
- Stellaris® LM3S9B96 Development Board Schematics
- Stellaris® LM3S9B96 Development Board Component Locations
- Stellaris® LM3S9B96 Development Board Connection Details
- Stellaris® LM3S9B96 Development Board Microcontroller GPIO Assignments
- Stellaris® LM3S9B96 Flash and SRAM Memory Expansion Board
- References
12 January 12, 2010
Dimensions (excluding LCD panel):
– 4.50” x 4.25” x 0.60” (LxWxH) with SDRAM board
– 4.50” x 4.25” x 0.75” (LxWxH) with EPI breakout board
Analog Reference: 3.0 V +/-0.2%
RoHS status: Compliant
NOTE: When the LM3S9B96 Development Board is used in USB Host mode, the host connector
is capable of supplying power to the connected USB device. The available supply current
is limited to ~200 mA unless the development board is powered from an external 5 V
supply with a =600mA rating.