Datasheet

MT-X1S Manual
Eight USARTs
IrDA modulation/demodulation for one USART
Four 2-Wire Interfaces w/ dual address match (I2C and SMBus)
Four SPI (Serial Peripheral Interface) peripherals
AES and DES Crypto Engine
16-bit Real Time Counter with separate Oscillator
Two Eight-channel, 12-bit, 2 Msps Analog to Digital Converters
Two Two-channel, 12-bit, 1 Msps Digital to Analog Converters
Four Analog Comparators with Window compare function
External Interrupts on all General Purpose I/O pins
Watchdog Timer with Separate On-chip Ultra Low Power Oscillator
● Special Microcontroller Features
Power-on Reset and Programmable Brown-out Detection
Internal and External Clock Options with PLL and Prescaler
Programmable Multi-level Interrupt Controller
Sleep Modes: Idle, Power-down, Standby, Power-save, Ext. Stby.
Advanced Programming, Test and Debugging Interfaces
JTAG (IEEE 1149.1 Compliant)
PDI (Program and Debug Interface)
● I/O and Packages
78 Programmable I/O Lines
100 - lead TQFP
● Operating Voltage (MT-X1S operates at 3.3V)
1.6 - 3.6V
● Speed performance (MT-X1S can operate at 0-32MHz)
0 - 12 MHz @ 1.6 - 3.6V
0 - 32 MHz @ 2.7 – 3.6V
January 29, 2015 6 http://www.mattairtech.com/