Datasheet

MT-X1S Manual
You may also need to program the EEPROM. If so, click on Select EEPROM at the bottom.
Then, click on the File menu and open the appropriate eep file. You will have to change the file filter to
allow you to see the eep file. Note that eep files are just hex files but with the eep extension instead of
hex. More information will appear about the file when selected. Both Program and Verify should be
checked. Click run to program the EEPROM.
dfu-programmer
TODO
Must erase chip first. Cannot read flash.
dfu-programmer at90usb162 erase
dfu-programmer at90usb162 flash-eeprom MT_X1S.eep (if applicable)
dfu-programmer at90usb162 flash MT_X1S.hex
January 29, 2015 30 http://www.mattairtech.com/