Specifications

5
6.3 OSD Menu
IN
640×480 (Input Timing)
Press the Menu button once
to bring up the OSD and
display the input (IN) and
Output (OUT) information.
OUT NTSC (Output TV System)
NTSC Press and hold the MENU
button for 3 seconds to
bring up the OSD then
press it repeatedly to move
the OSD cursor to the
desired selection. Once
the selection is made, if the
MENU button is not pressed
for a few seconds, the OSD
will disappear and the
display will output following
the selected parameters.
PAL
Underscan 1
Underscan 2
Overscan
Phase Adj. 0~31
Aspect Adj.
Full Screen
Lette (RB)ox
Pan & Scan
Auto TV 4:3
Auto TV 16:9
Below is the example of the scan selection result.
4:3
Source TV Underscan1 Underscan2 Overscan