Specifications

10
RESET
7
6.3 Remote Control
1
INPUT: Press this button sequentially
to switch in between the input
sources rotationally. LED will
1
illuminate accordingly to the
INPUT
CV
POWER
2
SV COMP
selected input source. 3
2
POWER: Press this button to switch
ON or set the device to standby
mode. Once the device is
connected with power supply.
4
3
CV/SV/COMP/PC/HDMI1/HDMI2/
SDI: Press these hot keys to switch
input source instantly.
6
4
EXIT: Press this button to exit the
menu or the current selection under
OSD.
5
MENU: Press this button to enter into
the OSD menu.
6
RESET: Press this button to set the
device back into the factory default
setting.
PC HDMI 1 HDMI 2
SDI
EXIT MENU
5
OK
AUTO
ADJUST
8
CR-117
7
AUTO ADJUST: Press this button when output image is not fitting the
display's screen perfectly. The device will auto adjust the image to
full screen.
8
OK & ▲▼◄►: Press OK to confirm the selection or press the arrow
buttons to scrolled in the OSD selections.