Specifications

8
6.2 Rear Panel
2 3 4 5 6
OPTICAL
RS232
SERVICE 1 SERVICE 2
OPTICAL
R L CV R L
L/R L/R
PC/HD
SDI
LOOP OUTPUT SDI
PC
DC 5V
HDMI HDMI 1 HDMI 2
Cr/Pr Cb/Pb Y SV R L
1 7
1
OUTPUT:
L/R: Connect to speaker or amplifier for audio output in stereo
format.
HDMI: Connect to HDMI display or amplifier for video or video and
audio display.
OPTICAL: Connect to speaker or amplifier for audio output in
digital format.
PC/HD: Connect to monitor/display for video output display. For
HD output,use D-Sub 9pin to 3 RCA adaptor cable for output HD
timing from 480p~1080p.
2
SERVICE 1:
Reserved for factory use only.
3
SDI LOOP OUTPUT:
Connect to SDI display or SDI extender for instant SDI input signal
display or extending the SDI signal to further area.
4
RS-232:
Connect with PC/NB and use RS-232 command to control the
device.
5
SERVICE 2:
Reserved for factory use only.
6
INPUT:
SDI: Connect to SDI camera or other SDI source equipment for
both video and audio signal sending.
HDMI 1: Connect to HDMI source equipment such as Blu-ray/DVD
player for both video and audio signal sending.