User`s manual

48 Chapter 5: Software Description
Calorimetry Sciences Corp.
CSC 5300 N-ITC III 49
User’s Manual
As you change the baseline or
the position of the injection
window relative to the
injection, the integration
area of the peak will change
accordingly. To view the
overall affect of your change
on the integrated peaks, click
the Area icon. A graph of the
integrated area will appear
(Figure 5-22).
When you have completed the
changes you can save your
changes to the raw data le by
using the File⇒Save or File⇒
Save As commands.
Integration of the peak
The Area tab allows you to
enter or change parameters
critical to proper analysis of
data prior to nal integration.
Area calculations are based
on the data previously loaded
under the Raw Data tab. If
you entered the key informa-
tion required for integration
when you set up the experi-
ment, few, if any, changes are
required. Most of the data you
entered will be imported to
BindWorks.
Figure 5-23: The area tab allows access to the experiment
spreadsheet.
Figure 5-24: Changing the value of an injection.