User`s manual
38 Chapter 5: Software Description
Calorimetry Sciences Corp.
CSC 5300 N-ITC III 39
User’s Manual
be used. Click on the stirrer on
box to turn on stirring.
Syringe Size (µL)
Syringe size (either 100 µL
or 250 µL) for the current
titration.
Experiment Type
Choose chemical titration
or electrical calibration. If
chemical titration is chosen,
choose the injection volume in
µL needed for the experiment.
If electrical calibration is
chosen, choose the pulse size in µJ.
Temperature Control – Set Point (°C)
This sets the control temperature of the ITC. After changing the set point you must click
Apply to incorporate the change.
Data Interval (s)
Time between data points collected. The default value is 1 second.
Equilibration Time (s)
Species a time, in seconds, to collect data before the rst injection or electrical pulse
occurs. This option is typically used to establish a baseline.
Figure 5-9: The Setup Feature Tab.