User`s manual
36 Chapter 5: Software Description
Calorimetry Sciences Corp.
CSC 5300 N-ITC III 37
User’s Manual
The actual injection rate in terms of volume, therefore, is 5 µL/12.25 s = 0.408 µL/s.
The settings in the Filter Control area of the Settings window should not be changed
by the user. The Power setting should indicate the proper frequency of the local line
voltage. The user may dene a Setup Password to limit access to the Settings dialog box.
When the Debug option is selected, two more feature tabs appear on the main screen
display: the System feature tab and the Diagnostics feature tab (see Feature Tabs below).
The display of the System tab is controlled by the Default System Charts portion of the
Settings window when Debug is selected.
Experiment • Start
The Experiment Start command begins data collection for an experiment. When an
experiment begins, the user will be prompted to enter a le name to which the data will
be saved in real time. Also appears on the toolbar as
.
Experiment • Stop
The Experiment Stop command is used to abort data collection before the completion of
the experiment protocol. Also appears on the toolbar as
.
Buret Menu
Figure 5-7 shows the buret menu. The buret menu commands are described below.
Buret • Move Up
The Buret Move Up command moves the buret to the fully raised
position. Also appears on the toolbar as
.
Figure 5-7: The Buret
Menu.
seconds 12.25 ms 12250 ms/Step 35 x 7000 x
µL 100
µL 5
==
Equation 5-2