User`s manual

30 Chapter 4: Hardware Description
Calorimetry Sciences Corp.
CSC 5300 N-ITC III 31
User’s Manual
5. Apply a vacuum to draw the water through the system and ush the cell. Figure 4-13
describes the ow of water through the apparatus.
Figure 4-13: Sideview of the cleaning tool in the sample cell. Water is drawn into the side port
inlet and down the length of the inner needle where it exits near the bottom of the cell. The water
then ows upward around the needle the length of the cell and access tube where it enters the
outer sleeve of the cleaning tool just below the O-ring. Flow continues upward to the outlet at the
top of the tool and out to the vacuum ask.