User`s manual
10 Chapter 2: Installation
Calorimetry Sciences Corp.
CSC 5300 N-ITC III 11
User’s Manual
3. Plug the loose USB cable into the back of the N-ITC III (Figure 2-1).
4. Plug the power cord of the N-ITC III into a surge suppressor power strip. Do not turn
equipment power on at this time.
Computer Setup
Detailed computer setup instructions are not included here. System conguration may
change due to advancements in technology. Follow the instructions included with your
system for proper setup and installation.
Connect the free end of the N-ITC III USB cable into a free USB port on the external
computer.
Powering the System
Turn the computer power on and allow the system to boot up. Turn on the N-ITC III
power. Start the ITCRun software by double-clicking the mouse pointer on the CSC
Figure 2-1: Attaching the N-ITC III power cord and USB
cable.