User`s manual

8 Chapter 2: Installation
Calorimetry Sciences Corp.
CSC 5300 N-ITC III 9
User’s Manual
order to obtain optimum performance from the N-ITC III.
N-ITC III Setup
The following sequence of steps is followed to prepare the N-ITC III for use:
1. Unpack and inspect the instrument and all components.
2. Place the N-ITC III on a suitable bench.
3. Plug the power cord on the back of the N-ITC III.
4. Setup the computer (and printer if applicable) next to the N-ITC III.
5. Connect the USB cable between the N-ITC III and the computer system.
6. Turn on the computer system.
7. Turn on the power switch located on the back of the N-ITC III.
8. Start the N-ITC III data collection program (ITCRun).
Unpacking and Inspection
Unpack your instrument components as soon as you receive them. Carefully inspect each
component for shipping damage. For help in assessing shipping damage or to report any
missing or defective parts, contact:
Calorimetry Sciences Corporation
890 West 410 North, Suite A
Lindon, Utah 84042
[phone]
[phone] FAX
[e-mail] (E-mail)
www.calscorp.com (World Wide Web)