User manual
2
(4). Controlling the scaler
The video scaler is controlled via front panel push buttons or remote control and its
status is indicated by OSD display. The front panel controls are shown below.
Front Panel
1. Mode: Press the button repeatedly will toggle through the following adjust controls:
Source ResolutionOutput Aspect3D EnhanceDigital NRSources....
Source mode: While under this mode, press or button to choose your
desired input source from Video, S-Video, Component or PC inputs.
Resolution mode: If output is selected as RGB, press or button to choose
from 640 x 480(VGA), 800 x 600 (SVGA), 1024 x 768(XGA),
or 1280 x 1024(SXGA) PC output. If output is selected as
YPbPr press or to choose from 480p, 576p,720P
or 1080i HDTV output.
Output mode: Press or to select between PC RGB output and HDTV
YPbPr output.
Aspect mode: Press or to choose between standard, 4:3 aspect and
wide(16:9) aspect ratio.
3D Enchance mode: To turn on or off the 3D comb filter function.
Digital NR mode: To turn on or turn off the digital noise reduction function.
137
24568