User manual

7. Output Selection
CSC-1600HD has ten output selection buttons allow you to directly select
the desired output resolution. Some output resolution mode may cover more
than one horizontal /vertical scanning frequency.
This scan rate information will be displayed on the screen when an output
selection button is pressed.
To alter the scanning rate under a certain output resolution please refer to
"ODS menu operation" selection.
* VGA button and LED -This LED illuminates when the 640 x 480 has been
selected by pressing the button.
* SVGA button and LED - This illuminates when 800 x 600 output has been
selected by presing the button.
* XGA button and LED - This illuminates when 1024 x 768 output has been
selected by pressing the button.
* SXGA button and LED - This illuminates when 1280 x 1024 output has been
selected by pressing the button.
* WXGA button and LED - This illuminates when 1280 x 768 has been selected
by pressing the button.
* 480p/YPbPr button and LED - This illuminates when 480p (852 x 480p) has
been selected by pressing the button.
while in this mode, only Pr/Y/Pb Connectors
(BNC) are required for connecting the output to
the displaying TV/Monitor.
* 576p/YPbPr button and LED - This illuminates when 576p (852 x 576p) has been
selected by pressing the button. While in this mode,
only Pr/Y/Pb connectors (BNC) are required for
connecting the output to the displaying TV/Monitor.
* 720p button and LED - This illuminates when the HDTV quality 720P (1280 x 720)
output is selected by pressing the button.
The aspect ratio of the output picture will be converted
to 16:9 from original 4:3 on the video input.
* 1080i button and LED - This illuminates when the interlacted HDTV 1080i
The aspect ratio of the output picture will be converted
to 16:9 from original 4:3 on the video input.
* 1365 x 768 button and LED - This illuminates when the 1365 x 768 output is
selected by pressing the button.
4