Specifications

7.2 Rear Panel

1 322 2

①

. RS-232: This slot is to connect with a PC or control system with D-Sub 9pin

cable for RS-232 control. For detail RS-232 commands please refers to

section 9.

. HDMI 1~2out/ARC 1~2/Ethernet 1~2: Connect Ethernet and Audio Return

Channel to capabilities of sink, The HDMI output display will pass the

Ethernet and Audio signal via HDMI v1.4 cable to HDMI output port

individually, each HDMI will separate the Ethernet and audio and

send it out from ARC and Ethernet ports. For ARC, when user had a

display with a built-in tuner or DVD player and wanted to send content

“upstream” from the TV back to the audio system to play with multi-

channel audio.

The HDMI Ethernet Channel, it can consolidates video, audio and data

streams into a single HDMI cable to the Ethernet Hub/AP to access the

internet and it incorporates a dedicated data channel into the HDMI

link, enabling high-speed, bi-directional networking at up to 100Mb/sec

to control and search from the sink. (Please see section 10 for diagram

illustration).

Note:1. Be sure to connect devices with one of the new cables designed

to support HDMI Ethernet Channel functionality, either the

standard HDMI cable with Ethernet or High Speed HDMI cable

with Ethernet.

2. When the HDMI output with the Audio and ARC are exist at the

same time the ARC will be the rst priority to access.

. HDMI input 1~4: Connect to HDMI or DVI sources equipment such

as DVD player or set-top-box for input video and audio sending.

Note: A. This system was tesetd with 24AWG cables if using cables of

another type, the performance of this system many be different.

B. Cable distance tested with a PS3 & 40" Samsung LED UA40B700

12-bit LCD TV.

C. Figures provided in this manual are for reference only, actual

gures may depend on the source and display used along with

the cables specications.

. Power: Plug the DC 5V power supply into the splitter and connect

the adaptor to AC wall outlet.