Specifications

7. Operation Controls and Functions

The following sections describe the hardware components of the unit.

7.1 Front Panel

2 43

. IR Remote Control Sensor.

②

. Audio/3D content indicator: The system will automatically detect

incoming audio/video signal and the Green LEDs will illuminate

accordingly.

. Input selection: Press input button to select input source, the Blue LED will

illuminate accordingly. When non of the LED is illuminating this means no

input is selected, this is to allow the device to access the ARC feature

alone.

④

. EDID selection: This EDID control button is determined if you are going to

use the EDID from the display attached to output 1 or use an onboard

EDID the Green LED will illuminate accordingly. When press EDID button

longer then 3 seconds, the RED LED will illuminate which means the EDID

already lock STD or TV EDID as you selected accordingly. When EDID is

set on STD audio will support PCM2CH and video will support

8 10 12

RGB

  

Y444

  

Y422



XvYCC

  

⑤

Power button: Press this button to switch on the device or press it again to

set it to standby mode.