Specifications

8. Remote Control
①
HDCP ON/OFF: Turn ON/OFF HDCP
encryption.
②
Color Space Selection: Switch between
RGB444, YCbCr444 or YCbCr422.
③
Output Timing Selection
④
OUTPUT ON: Turn ON/OFF the option
function.
⑤
Timing - : Backward Timing Selection.
⑥
AVMUTE ENABLE: For HDMI output, press
to mute the Audio. The LCD Display will
show "AVMUTE ON".
⑦
AUDIO: Switch between External
7.1CH(analog), external optical(digital)
or internal sinewave.
⑧
EDID: Pattern 32 hot key.
⑨
Output Format Selection: Switch
between PC, HD, DVI or HDMI output.
⑩
Output OFF: Switch off the output signal.
The LCD Display will show "OUTPUT OFF".
⑪
Pattern +: Next Pattern Selection.
For some patterns, it supports OPTION
function. After entering into option
function and then press Pattern up/down
buttons to adjust the Brightness level.
⑫
Timing +:Nex Timing Selection.
⑬
OPTION(OK): Not all the Patterns support
function adjustments, when screen
shows
“
Press [OPTION] to do the setting
”
that means this pattern support
function
adjustment. When user press the OPTION button the LED
will illuminate and then press Pattern +/- button to adjust the Brightness
level. Switch off the OPTION function before go to next pattern selection.
⑭
AVMUTE DISABLE: For HDMI output, press
to mute the Audio. The LCD display will show
“
disable AVMUTE
”
.
⑮
Pattern -: Backward Pattern Selection.
For some patterns, it supports OPTION function. After enter option function
and then press Pattern up/down button to adjust the Brightness level.

Note> Open remote control cover of battery, using dip-switch to set
controller address.
①
②
③
④
⑤
⑥ ⑭
⑫
⑪
⑮
⑨
⑧
⑦
⑩
⑬
8