CMPRO-4H4H 4 by 4 HDMI Matrix Operation Manual
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction �������������������������������������������� 1 2. Applications ������������������������������������������� 1 3. Package Contents �������������������������������� 1 4. System Requirements ���������������������������� 1 5. Features �������������������������������������������������� 2 6. Operation Controls and Functions ������� 3 6.1 Front Panel ����������������������������������������3 6.2 Rear Panel �����������������������������������������4 6.
1. INTRODUCTION The 4 by 4 HDMI Matrix with 4K×2K Support is capable of switching and routing an HDMI signal from any of its four sources to any of four connected HDMI displays, allowing any source to be shown independently on any display. It supports 3D, 'Deep Color' and High Definition lossless audio formats. Control of inputs and outputs can be easily operated through the on-panel buttons, IR remote control, RS232 or Web GUI controls. 2.
5. FEATURES • Supports Standard and High Definition resolutions up to 4K×2K (UHD) • Supports up to 7.1 channels of High Definition audio (LPCM, Dolby TrueHD, and DTS-HD Master Audio) • Supports 'Deep Color' up to 1080p/36-bit • Supports Internal/External EDID settings • Supports control through On-panel Buttons, IR, RS-232, and Web GUI Note: 1. This unit does not support HDMI to DVI conversion. 2. For playback of 4K×2K HDMI source signals, a 4K×2K capable display and High Speed HDMI cables are required.
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel POWER EDID 2 3 1 2 3 4 CMPRO-4H4H 4X4 HDMI MATRIX 1 4 1 IR Window: Accepts the remote control signal of this Matrix only. 2 POWER Button and LED: Press this button to power the Matrix ON/ OFF. The LED will light up when the power is ON. 3 EDID Button and LED: When in 'TV' mode, the unit will detect the EDID settings of the display connected to Output A.
6.2 Rear Panel OUTPUT INPUT 1 2 3 IR IN 4 RS232 CONTROL POWER DC 5V SERVICE 1 2 3 4 5 6 7 1 INPUT 1/2/3/4: Connect to HDMI equipped source devices such as DVD/Blu-ray players, set-top boxes or games consoles. 2 OUTPUT A/B/C/D: Connect to an HDMI TVs/displays or monitors for display of the selected source signal. 3 IR IN: Connect the supplied IR Extender for IR signal reception from the remote control included in the package.
6.4 IR Cable Pin Assignment IR Extender 1 IR Signal 2 Power 3.3V 3 Ground 6.
6.6 RS-232 Commands COMMAND DESCRIPTION A1~A4 Switch Output A to 1~4 B1~B4 Switch Output B to 1~4 C1~C4 Switch Output C to 1~4 D1~D4 Switch Output D to 1~4 ABC...1~ABC...4 Switch Output A B C...
6.7 Web GUI Control On a PC/Laptop that is connected to the same active network as the Matrix, open a web browser and type the Matrix's IP address on the web address entry bar (The IP Address can be obtained via RS-232 by using the 'help' command or use the default IP: 192.168.0.1). The browser will display the Matrix's status, control and user setting pages. Click on the 'Control' tab access to power, input/output ports, EDID and factory reset settings.
Click on the 'Setting' tab allows user to reset the IP configuration. The system will ask for a reboot of the Matrix each time any of the settings are changed. The IP address used to access the Web GUI control will also need to be changed on the web address entry bar. Note: The version of Internet Explorer being used should be Version 8 or better to ensure compatibility with the Web GUI function.
7.
8. SPECIFICATIONS 8.1 Technical Specifications Video Bandwidth 340 Mbps /10.2 Gbps Input Ports 4×HDMI (Type A Female), 1×IR Extender (3.5 mm mini-jack),1×RS-232 (D-Sub 9-pin), 1×Control (RJ45/LAN), 1×Mini USB (Manufacturer use only) Output Ports 4×HDMI (Type A Female) Output Resolution VGA~WUXGA, 480i ~1080p & 4K×2K@24/25/30 Hz HDMI I/O Cable 15 m@8-bit, 10 m@12-bit, 5 m@4K×2K Distance Power Supply 5 V/3.
8.
9.
CYPRESS TECHNOLOGY CO., LTD Home page: http://www.cypress.com.
