CMLUX-4H4CAT 4 by 4 HDMI V1.
Revision History Version No. V1 Date 20090610 Summary of Change Preliminary Release Precautions Failure to follow the precautions described below may cause damage to 4 by 4 HDMI V1.3 over CAT 5 Matrix and void the warranty. DO NOT open the case. Doing so will void the warranty. If you find problem with it, please return back to your retailer or seller who will assist you or provide you with solution. DO NOT use third-Party AC adapter or power cord. Doing so may damage 4 by 4 HDMI V1.
Table of Contents 1. Introduction.....……………………..…………………................................ 1 2. Applications...........................…..…………………………………….....… 1 3. Package Contents..............................……………………………….……. 1 4. System Requirements.............................……………………………..…… 1 5. Features................................…..…………………………………...……….. 2 6. Installation..............................…………………………………...………….. 3 6.1. Front Panel......................…………………………………...………….. 3 6.2.
1. Introduction This high performance HDMI Matrix over CAT 5 with remote control is compatible with HDMI v1.3 specifications. A cutting-edge technology which defines the supports to transfer Deep Color (10 bits/color) video and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio. It offers you maximum convenience in HDMI signal distribution when you have multiple HDMI sources and displays to connect together.
. Features HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant. Supports digital video formats in Deep Color Mode at up to 30 bits (10bits/ color) and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio. The HDMI input is compensated, clock / phase adjusted, and jitter eliminated so the output is a brand new standard HDMI signal. Supports input source LED indicators on each output select. Compatible with all HDMI sources and displays.
. Installation 6.1 Front Panel ③ ① ② ④⑤ ①. Remote control sensor. ②. Power switch & LED Indicator: The LED will illuminate when the power is turned on. ③. Input Select/Indicators (A/B/C/D): Press the “HDMI out A” button repeatedly to switch to your desired source and the LED will illuminate to indicate which input source is being selected and routed to HDMI A display. ④. HDCP indicators: When the input source is with the HDCP protection the HDCP LED will illuminate. ⑤.
6.2 Rear Panel ①② ③ ④ ⑤⑥⑦ ①. EDID Control Switcher: Default factory setting is TV, leave as if the display is properly. Switch to STD to use built-in EDID. [Note]: 1. When EDID switch to TV, the unit will detect the first HDMI output source’s EDID and record in the unit. If the first detected output source is DVI it will pass to next source until the first HDMI source been detected. The detection priority is HDMI v1.3 > HDMI v1.2 > DVI. 2.
7. Remote Control 1. Power: Press the button to turn on/off the unit. 2. Input Select for HDMI OUT A: Press 1, 2, 3 or 4 to select the desired input source for HDMI OUT A. 3. Input Select for HDMI OUT B: Press 1, 2, 3 or 4 to select the desired input source for HDMI OUT B. 4. Input Select for HDMI OUT C: Press 1, 2, 3 or 4 to select the desired input source for HDMI OUT C. 5. Input Select for HDMI OUT D: Press 1, 2, 3 or 4 to select the desired input source for HDMI OUT D. 5 8. RS-232 Protocal 8.
8.
9.
10. Specifications Frequency bandwidth Input ports Output ports EDID HDMI Audio output HDMI Cable in HDMI Cable out Color Space IR IN/OUT Deep Color HDMI Resolution DVI Resolution Power Supply Dimensions (mm) Weight(g) Chassis Material Silkscreen Color Operating Temperature 2.25Gbps (single link) 4 x HDMI female ports, 4 x Video/DDC CAT 5 ports Standard, TV/Moving Port 1 PCM2, PCM5.1, PCM7.1, Dolby5.1, DTS5.
CYPRESS TECHNOLOGY CO., LTD. Home page: http://www.cypress.com.
