User manual

Output Setup
When Output Set up is selected a submenu as below appears:
USE +,- to move the tick (V) to your desired adjust item, Press the Menu/Enter
to confirm your selection.
At this point, the selected parameter will turn red, and you can use +,- to increase
or decrease the value of the parameter.
When adjustment is complete, Press "Menu" to leave the parameter. Move the tick "V"
to "Exit", then press menu/enter to exit.
Output Setup
Timing XGA
Exit
Press the " MENU/ENTER" button to enter into output timing select mode.
Press +,- to toggle through a variety of output resolutions as below.
Once your desired resolution is selected. press the Menu/Enter
to enter the resolution. The output picture will be adjusted to your newly
selected resolution.
VGA
SVGA
XGA
WXGA
SXGA
480p
576p
720p
Pseudo 1080i
640x480
800x600
1024x768
1280x768
1280x1024
720x480
720x576
1280x720
960x540p
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
50Hz
60Hz
60Hz
Vertical rate
Resolution
Note: 1. All output resolutions except 576p have 60Hz vertical rate,
The 576p resolution has 50Hz vertical rate.
2.
- The output signal format for the 5 PC resolutions (VGA~SVGA) is RGBHV.
- The output signal format for the 4 HD resolutions (480p~pseudo 1080i) is YPbPr.
(6). Scart input pin configuration:
1357911
13
15171921
2468101214161820
1. Audio output 1, Right channel.
2. Audio input 1, Right channel.
3. Audio output 2, Left channel.
4. GND.
5. GND.
6. Audio input 2, Left channel.
7. RGB Blue input.
8. Bypass.
9. GND.
10. Bypass.
11. RGB Green input.
12. Bypass.
13. GND.
14. GND.
15. Chroma or RGB Red input.
16. Bypass (fast blanking).
17. GND.
18. GND.
19. Video output.
20. Video Input.
21. GND/Shield.
4