Specifications
3
7. Operation Controls and Functions
7.1FrontPanel
2 951
3 4 6 7
8
①
EDID Update button: Use this function only when the image does not
display after trying to switch the EDID/HD/3G EDID swtich.
EDID procedures as below.
CLUX-H2SDI
SDI Monitor
DVD Player
HDMI SDI
A. Please make sure the DVD is set on “auto mode” in output timing's setting.
If the image display properly, stop using this function but if no image
display after the connection. go to step B.
DVD Player
HDMI
TV/Monitor
Adjust to SDI accept Timing
(HDMI Cable)
B. Connect HDMI source directly (without connecting to CLUX-H2SDI )
to HDMI monitor or TV to see if the image display and make sure the
source's output timing is supporting SDI or CLUXH2SDI's timing. If yes, go
to step C. If no, please change a different monitor or TV and adjust the
timing until the image display.