Specifications

9
EDID Update LED Conrmation Status
No.
EDID EDID Single LED EDID Video HDMI
Description
Switch key
3G HD SD Update Lock /DVI
1 Update Pressed On

● ●
  
3G Native, HDMI mode, Read OK
2 Update Pressed On ●

●
  
HD Native, HDMI mode, Read OK
3 Update Pressed On ● ●
   
SD Native, HDMI mode, Read OK
4 Update Pressed On ● ● ●
  
No support timing, HDMI mode, Read OK
5 Update Pressed On

● ●
 
● 3G Native, DVI mode, Read OK (Note4)
6 Update Pressed On ●

●
 
● HD Native, DVI mode, Read OK (Note4)
7 Update Pressed On ● ●
  
● SD Native, DVI mode, Read OK (Note4)
8 Update Pressed On ● ● ●
 
● EDID format error (Note5)
9 Update Pressed On ● ● ●

● ● No connection or connection error
Note
1. Key:
"

" LED On
"●" LED Off
"

" LED Flashing
2. Only when the EDID button is being pressed and hold consistantly will the EDID update
progress. When the update is complete the Video Lock LED will illuminate. If the button
is not pressed the LED will illuminate according to “System Operation LED Signal Status”.
3. The output HDMI source's output resolution is based on output display monitor/TV’s EDID
settings but results may vary with different sources. The EDID update function is designed
to resolve compatibility issue such as these.
4. When DVI EDID settings are detected, the system will check if the EDID’s native mode
supports SDI timing. If it does, the image will be displayed in the formats in No. 5,6 & 7.
If not, the system will automatically copy the default DVI EDID (Native 3G) mode and
displayed in the format in No. 5.
5. EDID format errors include: Header error, Checksum error and EDID error. Under this
condition the default EDID or the updated EDID will not be updated.