QU-12S1A 1 × 2 HDMI Splitter with 3D Audio to Amplifier OPERATIONS MANUAL
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction �������������������������������������������6 2. Applications �������������������������������������������6 3. Package Contents ����������������������������������6 4. System Requirements ���������������������������6 5. Features ��������������������������������������������������6 6. Operation Controls and Functions �������7 6.1 Front Panel ��������������������������������������������������� 7 6.2 Rear Panel ����������������������������������������������������� 8 7.
1. INTRODUCTION The 1 x 2 HDMI Splitter with audio is fully compliant with HDMI and allows the output from any HDMI equipped device to be split and allow connection to up to two HDTV displays e.g. an LCD TV and a projector in the same room. The third HDMI output is an audio with blue screen output, which means it can be connected to an AV Receiver that does not support 3D signal. 2. APPLICATIONS Showroom environment Education demo Installati on usage Home entertainment 3.
Supports LPCM 7.1CH, Dolby Digital and Dolby Digital Plus Audio transmission (32–192 kHz Fs sample rate) Supports a wide range of PC and HDTV resolutions from VGA to WUXGA and 480i to 1080p HDMI cable distance test with 1080p/8-bit or 12-bit resolution, the Input/Output distance can run up to 15 meters Supports EDID functionality. This device will detect the video's EDID information based on HDMI OUT 1 and the audio's EDID based on HDMI OUT 3.
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel HDMI OUT 1 HDMI OUT 2 HDMI OUT 3 AUDIO QU-12S1A 1 2 1 HDMI OUT 1 & 2 Connect each of the output ports to a HDMI equipped video display such as TV or projector. HDMI OUT 1 is the master video port and the device will send the video content according to that connected display's EDID information.
6.2 Rear Panels HDMI IN 3D DC 5V POWER 1 2 3 1 HDMI IN Connect the HDMI or DVI output of your source equipment such as 3D Blu-ray player or set-top box. 2 Power/3D indicator When the system is ON the RED LED will illuminate, when the system detects a 3D formatted video signal the GREEN LED will illuminate. 3 DC power jack Plug the DC 5V power supply into the splitter and connect the adaptor to AC wall outlet.
7. CONNECTION DIAGRAM 3D DVD or Blu-ray Player HDMI Power Supply Rear 3D HDMI IN DC 5V POWER HDMI OUT 1 HDMI OUT 2 CLUX-3D12S1A HDMI SPLITTER HDMI OUT 3 AUDIO HDMI AVR with HDMI Input (Non-3D Ready) 3D Ready TV Projector In this example, a 3D Blu-ray player is connected to the splitter allowing the HDMI output to be split to a 3D-ready LCD TV and a non 3D-ready projector.
8.
CYP (UK) Ltd., Unit 6, Metro Ind. Centre, St. John's Road, Isleworth, Middlesex, TW7 6NJ Tel: +44 (0) 20 8232 8842 | Fax: +44 (0) 20 8560 8050 | Email: sales@cypeurope.com www.cypeurope.
