Specifications

Video
→
1080p 8-bit or 12-bit (max)
Audio
→
PCM 2CH
3. The EDID selection will only activate when the unit is re-plug and power on.
④
System Reset: Switch to
“
ON
”
, the system will send the internal CEC to the
display within 8~10 minutes to force all the displays to switch to HDMI 1 input
port. Meanwhile, the source
’
s CEC will not functional to the system. When
switch to
“
OFF
”
, the system reset function will be terminate. Factory default is
on
“
OFF
”
.
⑤
HDMI input: This slot is for connecting the source equipment with HDMI
cables.
⑥
HDMI output: This slots is for connecting the display with HDMI Cable.
Note:
A. Cable tested with CAT-6E / 23AWG / Solid and therefore, cable with
different specication may result in different distance.
B. Cable distance tested with equipment PS3 40G, and 37" SamSung 12 bit
LCD TV.
C. Figures provided in this manual are reference gures only, actual
gures may depend on source and display use with cable specication.
⑦
Video/DDC 2~8: These slots allow you connect to the HDMI displays with
CAT6 to HDMI receiver. When more than one output are connected, the
HDMI outputs play identical video signal simultaneously.
⑧
Power: This slot is to plug the 5VDC power supply included in the package
into the unit and connect the adaptor to an AC wall outlet.
5