Specifications

© 2010 Cypress Solutions Complete Manual: CTM-15X Firmware 1.3.0
Open CTM (Revision D)
99
Command Reference
OK
3. Query the current PAD forwarding character
cmd padfwdc
cmd padfwdc 32 0
OK
A cmd save is required for this command to take effect.
See also: pad, padecho, padesc, padesct, padfwdl, padfwdt, padip, padmode, padpfc, padport, padreset,
padsvct
return to list of commands
padfwdl x
Sets the maximum PAD packet length. Default = 40.
If 0 is specified then every character is sent immediately.
x = 0 sent every characters immediately
x = 1 to 1000 maximum PAD packet length
The current PAD packet length can be queried by using the padfwdl command without parameters.
Examples:
1. Configure the received RS232 data to be sent in packets of 10 characters each
cmd padfwdl 10
OK
2. Query the current PAD forwarding length setting
cmd padfwdl
cmd padfwdl 10
OK
A cmd save is required for this command to take effect.
See also: pad, padecho, padesc, padesct, padfwdc, padfwdt, padip, padmode, padport, padreset, padsvct
return to list of commands