Specifications

Open CTM (Revision D)

Command Reference

Example:

1. Use an alternate NTP server:

cmd ntpserver 1.openwrt.pool.ntp.org

See also: gpstime, mode, networktime, ntptime, timesync

return to list of commands

ntptime n

Set priority of the built-in network time protocol (NTP) client as an external system time synchronization

source. Requires a valid NTP server URL/IP to be configured using ntpserver and a modem to be

configured in a mode other than manual connection mode (not in cmd mode 1).

n = 0 Disabled

n = 1-3 Priority relative to other external system time synchronization sources with 1 = highest (default: 3)

A cmd save and a power cycle are required for this command to take effect.

Example:

1. Set NTP time as highest priority relative to other external time synchronization sources:

cmd ntptime 1

See also: gpstime, mode, networktime, ntpserver, timesync

return to list of commands

8.1.12 “O” Commands

obdcond n b t mt [trig1 ... trig4]

Sets the condition(s) that will trigger an OBD report.

The conditional operator is used to indicate how all following parameters will be used to determine if a

report is triggered.

n = 1 to 8 OBD trigger number

b = 0 conditional operator for all following parameters: Off