Specifications

© 2010 Cypress Solutions Complete Manual: CTM-15X Firmware 1.3.0
Open CTM (Revision D)
84
Command Reference
cmd mode 2
OK
A cmd save is required for this command to take effect.
return to list of commands
modemdevice [ /dev/ttyUSBn ]
Configure the modem serial port device. Default is /dev/ttyUSB0.
This command requires a cmd save and modem power cycle to take effect.
Example:
cmd modemdevice /dev/ttyUSB1
OK
cmd modemdevice
cmd modemdevice /dev/ttyUSB1
OK
return to list of commands
modemid <string>
Assigns a user configurable ID to the modem.
If no ID is given then the modem’s 11-digit decimal ESN (if available) will be used.
If less than 11 characters is entered, trailing 0’s will be automatically inserted in message type 112.
Examples:
cmd modemid CAR1234 sets the modem ID to <CAR1234>
cmd modemid returns the currently configured modem ID
A cmd save is required for this command to take effect.
return to list of commands
modemmode n