Specifications

© 2010 Cypress Solutions Complete Manual: CTM-15X Firmware 1.3.0
Open CTM (Revision D)
82
Command Reference
cmd modbusmode 1
OK
2. Query the currently configured MODBUS gateway mode
cmd modbusmode
cmd modbusmode 1
OK
A cmd save is required for this command to take effect.
See also: mode
return to list of commands
modbusport xxxxx
Sets the listening port number for the MODBUS server and the listening port number for MODBUS TCP
slaves.
Default is 502.
xxxxx = 1 to 65535 MODBUS server port number
The current MODBUS port number can be queried by entering the modbusport command without
parameters.
Note:
If the modem is currently in MODBUS mode and any other LAN or firewall configuration commands are
set after issuing the modbusport command, then both a cmd save and a power cycle are required to
resume proper MODBUS operation.
Examples:
1.Set the MODBUS port to 12345
cmd modbusport 12345
OK
2. Query the existing MODBUS port
cmd modbusport
cmd modbusport 502
OK
A cmd save and power cycle are required for this command to take effect.
See also: modbusadd, modbusdel, modbusctm130, modbusidmap, modbusmode, mode