Specifications

Open CTM (Revision D)

Command Reference

cmd ioemail 1 me@… sets the send to email address for IO report #1

cmd ioemail 1 clears the email address for IO report #1

cmd ioemail returns the email address for all 8 IO reports

A cmd save is required for this command to take effect.

return to list of commands

iolocport n xxxxx

Sets the port number of the local server that the IO report will be sent to. Up to 8 IO reports may be

configured.

n = 1 to 8 IO report number

xxxxx = 0 to 65535 local port number

The current local port configuration for an IO report can be queried by using iolocport n where n is the

report number.

If n is omitted, all reports will be queried.

Examples:

cmd iolocport 1 5005 report #1 will be sent to local port 5005

cmd iolocport queries the local port setting of all IO reports

A cmd save is required for this command to take effect.

return to list of commands

iomes

Displays all messages associated with each IO report.

This is a read only command.

Example:

cmd iomes displays all messages associated with each IO report

return to list of commands

ioremip n iii.iii.iii.iii