Specifications

Open CTM (Revision D)

Command Reference

n = 1 to 8 ignition trigger condition

r = 1 to 999 report number

r = 0 disables the report

Example:

1. Set report #2 for ignition trigger condition #1.

cmd ignreport 1 2

A cmd save is required for this command to take effect.

See also: igncond, repaddmes, repdelmes, repemail, replocport, repremip, repremport, repsms, reptype

return to list of commands

input

Reads the value and state of all inputs. There are a total of six inputs.

Both the analog voltage (range 0 to 10 Volts) and digital state (0 for off and 1 for on) are returned.

This is a read only command.

Example:

1. Query the current status of input #1 through #6

cmd input

0.00V 0

0.08V 0

return to list of commands

insetup n d x.x p a

Configures the six inputs. Their use as a digital or analog input can be set along with their alarm states.

Note: Voltage threshold values are accurate to one decimal place, (X.X), if additional decimal place values

are entered, they will be rounded to the nearest decimal place.