Specifications

Open CTM (Revision D)

Command Reference

Examples:

1. Send report #1 to local port 5005

cmd gpslocport 1 5005

2. Query the local port setting of all GPS reports

cmd gpslocport

cmd gpslocport 1 5005

A cmd save is required for this command to take effect.

See also: gpsrep, gpsdelmes, gpsaddmes, gpslocport, gpsremip, gpsemail, gpssms

return to list of commands

gpsmes

Displays all messages associated with each GPS report.

This command is read only.

Example:

cmd gpsmes displays all messages associated with each GPS report

return to list of commands

gpsparam

This command configures the parameters and priority of the port the modem will use for obtaining GPS

information.

cmd gpsparam input priority port br db p sb fc

Where:

input - GPS input to configure 1-4

priority - Data Priority (0-3). 0=highest

port - Serial port to use. e.g. ttyS1 or ttyUSB14

br - baud rate (same as cmd port)

db - data bits (same as cmd port)

p - parity (same as cmd port)

sb - stop bits (same as cmd port)

fc - flow control (same as cmd port)