Specifications

© 2010 Cypress Solutions Complete Manual: CTM-15X Firmware 1.3.0
Open CTM (Revision D)
55
Command Reference
return to list of commands
gpsemail n <email address>
Sets the email address that the GPS report will be sent to (if configured for email using gpsrep).
Up to 8 email addresses may be configured – one for each of the 8 GPS reports. The default email address
is blank.
Note that an email server is required – see emailsrv.
n = 1 to 8 GPS report number
<email address> = name@domain email address to which the report will be sent
(leave blank to clear the address)
The current email address configured for all GPS reports can be queried by using the gpsemail command
without parameters.
Examples:
1. Set the destination email address for GPS report #1
cmd gpsemail 1 [e-mail]
OK
2. Clear the email address for GPS report #1
cmd gpsemail 1
OK
3. Query the email address for all GPS reports
cmd gpsemail
cmd gpsemail 1 [e-mail]
OK
A cmd save is required for this command to take effect.
See also: gpsrep, gpsdelmes, gpslocport, gpsremip, gpsremport, gpsaddmes, gpssms
return to list of commands
gpsgga