Specifications

© 2010 Cypress Solutions Complete Manual: CTM-15X Firmware 1.3.0
Open CTM (Revision D)
53
Command Reference
cmd gpscond 1 1 60
OK
2. Send report #2 every 60 seconds AND distance is greater than 50 metres
cmd gpscond 2 1 60 50
OK
3. Send report #4 every 60 seconds AND the distance traveled is greater than 50 metres AND the speed is
between 20kph and 60kph
cmd gpscond 4 1 60 50 20 60
OK
4. Send report #5 every 60 seconds OR when distance traveled is greater than 50 metres OR speed is
greater than 60kph, OR if the heading changes by more than 45 degrees, with a maximum report rate of
one every 10 seconds
cmd gpscond 5 2 60 50 60 200 45 10 10
OK
5. Send report #6 only when distance traveled is greater than 0 metres AND the speed is between 0kph
and 5kph AND with a maximum report rate of one every 7 seconds
cmd gpscond 6 1 0 0 0 5 0 0 7
OK
6. Query the conditions used to trigger all GPS reports
cmd gpscond
cmd gpscond 1 1 30 0 0 0 0 0 0
cmd gpscond 2 1 30 0 0 0 0 0 0
cmd gpscond 3 2 10 10 0 0 0 0 0
OK
7. Query the conditions used to trigger GPS report #4
cmd gpscond 4
cmd gpscond 4 1 0 0 0 5 0 0 7
OK
A cmd save is required for this command to take effect.
return to list of commands