Specifications

Open CTM (Revision D)

List of Commands

replocport (configure report local port) (see pg. 120)

reportscripts (configure custom scripts to be triggered when reports are generated) (see pg. 121)

repremip (configure report remote IP address) (see pg. 122)

repremport (configure report remote port) (see pg. 122)

repsms (configure report SMS address) (see pg. 123)

reptype (configure local and remote report types, store-and-forward) (see pg. 124)

restore (restores last saved configuration) (see pg. 125)

rmtd (reverse telnet connection) (see pg. 126)

rmtssh (remote ssh access) (see pg. 126)

rmttelnet (remote telnet) (see pg. 126)

rmtweb (Remote web access) (see pg. 127)

rssi (RF signal strength) (see pg. 128)

7.1.15 S

saltreport (set salt-spreader report) (see pg. 128)

satbackup (switch to backup satellite modem) (see pg. 129)

save (saves configuration) (see pg. 130)

showconfig (displays current configuration settings) (see pg. 130)

showstate (displays modem state) (see pg. 131)

singlepc (single pc mode) (see pg. 132)

smssend (send SMS message) (see pg. 133)

smstext (SMS text message) (see pg. 133)

smsto (send SMS to) (see pg. 133)

smsview (SMS message view) (see pg. 134)

snfdelay (Store and Forward delay period before SNF starts) (see pg. 134)

snfflush (Store and Forward Flush) (see pg. 135)

snflog (Store and Forward log) (see pg. 135)

spc (service provisioning code) (see pg. 135)

speedth (speed threshold for enabling RF module of the modem) (see pg. 136)

sshkey (generate a ssh key) (see pg. 137)

sshport (set modem ssh server port) (see pg. 137)

sshtimeout (ssh session idle timeout) (see pg. 137)

swipemode (set swipe-card interface) (see pg. 138)

swipereport (set swipe-card report) (see pg. 139)

syslog (system log) (see pg. 140)

7.1.16 T

telnetport (telnet port) (see pg. 140)

telnetpswd (password for telnet access) (see pg. 141)

telnettimeout (telnet timeout) (see pg. 141)

timesync (set period for system time synchronization) (see pg. 142)