Specifications

Open CTM (Revision D)

List of Commands

7.1.9 L

landhcp (LAN DHCP server settings) (see pg. 72)

lanip (IP address of modem on LAN) (see pg. 73)

lannetmask (Netmask of modem on LAN) (see pg. 74)

lanrepip (LAN IP address for local reporting) (see pg. 75)

7.1.10 M

mip (mobile IP) (see pg. 75)

modbusadd (add MODBUS TCP slave, serial slave or self slave, query MODBUS slave gateway list) (pg. 76)

modbusctm130 (enable backward compatibility with CTM13x MODBUS messages over-the-air) (pg. 79)

modbusdel (delete MODBUS entry) (see pg. 79)

modbusgw (manual MODBUS gateway initiation) (see pg. 80)

modbusidmap (set up MODBUS ID to modem IP:port map) (see pg. 80)

modbusmode (sets the MODBUS gateway mode) (see pg. 81)

modbusport (sets the MODBUS port number) (see pg. 82)

mode (sets connection mode) (see pg. 83)

modemdevice (configure modem device port) (see pg. 84)

modemid (assign modem ID) (see pg. 84)

modemmode (enable Modem Mode or Half Bridge mode) (see pg. 84)

modemmodedhcp (enable DHCP support with Modem Mode) (see pg. 86)

7.1.11 N

netwd (network watchdog) (see pg. 86)

networktime (set priority of cellular network time as system time synchronization source, Sierra Wireless

data devices/modules only) (see pg. 87)

nmeamode (set NMEA 0183 version for GPGLL and GPRMC sentences) (see pg. 88)

ntpserver (set URL or IP of NTP server for system time synchronization) (see pg. 88)

ntptime (set priority of NTP client as system time synchronization source) (see pg. 89)