Specifications

Open CTM (Revision D)

List of Commands

7.1.6 F

firewall (Firewall – Port forwarding) (see pg. 48)

freeconsole (kill serial console prompt) (see pg. 49)

friends (set firewall friends list) (see pg. 49)

7.1.7 G

gpsaccel (GPS report trigger for hard acceleration and deceleration events) (see pg. 51)

gpsaddmes (add GPS messages to a report) (see pg. 51)

gpscond (GPS report trigger conditions) (see pg. 52)

gpsdata (display status of GPS input devices) (see pg. 54)

gpsdelmes (delete GPS message) (see pg. 54)

gpsemail (GPS email address) (see pg. 55)

gpsgga (GPS GGA message) (see pg. 55)

gpsinput (GPS input device, internal on board GPS module, external GPS device or cellular based A-GPS)

(see pg. 56)

gpslocport (GPS local port) (see pg. 56)

gpsmes (GPS messages) (see pg. 57)

gpsparam (GPS port configuration and priority) (see pg. 57)

gpspos (GPS port configuration and priority) (see pg. 57)

gpsremip (set fixed GPS position) (see pg. 58)

gpsremport (GPS remote port) (see pg. 60)

gpsrep (GPS reporting) (see pg. 60)

gpsrmc (GPS RMC message) (see pg. 62)

gpssms (set destination of GPS SMS report) (see pg. 62)

gpstime (set priority of valid GPS as system time synchronization source) (see pg. 63)

7.1.8 I

igncond (ignition report trigger conditions) (see pg. 64)

ignreport (set ignition trigger report) (see pg. 64)

input (query input channels status) (see pg. 65)

insetup (input setup) (see pg. 65)

ioaddmes (add IO message) (see pg. 67)

iocond (IO report trigger conditions) (see pg. 67)

iodelmes (delete IO message) (see pg. 68)

ioemail (IO email address) (see pg. 68)

iolocport (IO local port) (see pg. 69)

iomes (IO messages) (see pg. 69)

ioremip (IO remote IP address) (see pg. 69)

ioremport (IO remote port) (see pg. 70)

iorep (IO reporting) (see pg. 70)

iosms (set destination of IO SMS report) (see pg. 71)

ipadr (IP address) (see pg. 72)