Specifications

Open CTM (Revision D)

List of Commands

7 List of Commands

7.1.1 A

agpspde (configure Assisted GPS (A-GPS) using cellular device location based features) (see pg. 32)

apn (set carrier access-point name) (see pg. 33)

apply (apply network / firewall and other system configuration changes) (see pg. 33)

7.1.2 B

boomreport (set the boom tracker report) (see pg. 34)

7.1.3 C

cardlistclear (erase approved ID list from modem) (see pg. 35)

cardlistload (load approved ID list for swipe card interface) (see pg. 35)

cardlistsave (save approved ID list to non-volatile RAM) (see pg. 36)

cardlockload (load a swipe card lock script to the modem) (see pg. 36)

cardunlockload (load a swipe card unlock script to the modem) (see pg. 37)

clientmac (set client mac address for modem mode with DHCP) (see pg. 37)

confupgrade (configures the modem for automatic configuration capability) (see pg. 37)

ctm15x (command for configuration of protected values) (see pg. 39)

7.1.4 D

data (query count of data transmitted/received over wireless link) (see pg. 39)

datacond (wireless link total data count trigger condition) (see pg. 40)

datareport (set the link data report(s)) (see pg. 41)

dir (set NAM phone number,MDN,MIN) (see pg. 41)

dmz (demilitarized zone (DMZ) feature) (see pg. 42)

dnscheck (check valid DNS) (see pg. 43)

dout (digital outputs) (see pg. 44)

dyndns (dynamic DNS) (see pg. 45)

7.1.5 E

emailsrv (set email server) (see pg. 46)

enghours (calculate engine hours) (see pg. 46)

enghrmode (used to configure enghours command) (see pg. 47)

esn (electronic serial number) (see pg. 47)

ethernet (Enable/Disable Ethernet services) (see pg. 48)