Specifications

© 2010 Cypress Solutions Complete Manual: CTM-15X Firmware 1.3.0
Open CTM (Revision D)
178
ULCP Remote Configuration Messages
Response message body: None.
12.2.2 Execute Application-Specific Script
Request header: 0x5B 0xSS 0x02 0x00 0x00 0x08 0x0000
Request message body:
Hex
Description
1 byte
0x00 = Execute application-specific script 0; 0x01 = Execute application-specific
script 1
0x00000000000000
Not used
If the command was not successful then no response is sent.
Response header: 0x5B 0xSS 0x03 0x00 0x00 0x00 0xNNNN
Where NNNN is the password.
Response message body: None.
12.2.3 NMEA GGA Query
Request header: 0x50 0xSS 0x00 0x00 0x00 0x00 0x0000
Request message body: None.
If the command was not successful then no response is sent.
Response header: 0x50 0xSS 0x01 0x00 0x00 0x00 0xNNNN
Where NNNN is the password.
Response message body:
Refer to Message Type 80 $GPGGA
12.2.4 NMEA RMC Query
Request header: 0x52 0xSS 0x00 0x00 0x00 0x00 0x0000
Request message body: None.
If the command was not successful then no response is sent.
Response header: 0x52 0xSS 0x01 0x00 0x00 0x00 0xNNNN
Where NNNN is the password.
Response message body:
Refer to Message Type 82 $GPRMC