Specifications

© 2010 Cypress Solutions Complete Manual: CTM-15X Firmware 1.3.0
Open CTM (Revision D)
171
Email Message Format
Note: This message type, 255, is for specific customers. ULCP binary messages should not be used for
local serial report mode 1 and 2 in applications where timed message delivery is critical.
Example:
To send the string, "TEST"
Send "0xFF 01 06 00 00 04 00 00 54 45 53 54"
10 Email Message Format
E-mail reporting is configured in the following manner:
emailsrv sets the mail server the modem will use to relay the email message.
repemail, gpsemail, ioemail configure the e-mail address to send the reports too.
reptype, gpsrep, iorep configure the reporting mechanism to use email vs. other mechanisms such as UDP
or TCP
repaddmes, gpsaddmes or ioaddmes adds messages to the report that make up the body of the email
message.
The "From:" field of the email will read:
ggggggggggg @ xxx.xxx.xxx.xxx
ggggggggggg is the modem ID configured using modemid.
xxx.xxx.xxx.xxx is the modem IP address.
From: 09604890968@96.1.5.204
To:
Cc:
Subject:
To: [e-mail]
Subject: Wireless Report
Return-Path: [e-mail]
Message-ID: <[e-mail]>
X-OriginalArrivalTime: 20 Apr 2009 22:54:00.0468 (UTC)
FILETIME=[E5071D40:01C9C20A]
Date: 20 Apr 2009 15:54:00 -0700
$POBDD,V*27
$PACCEL,225623.00,4915.3907,N,12259.8040,W,000.0,000.0,200409,09604890968*06
$PODO,225623.00,27,200409,09604890968*0F