Specifications

Open CTM (Revision D)

161

Report Messages

Note: ULCP binary messages should not be used for local serial report mode 1 and 2 in applications where

timed message delivery is critical.

9.15 Message Type 92, ULCP binary format, Wireless Link TX/RX Data

Count with Modem ID

Header: 0x5C 0xSS 0x06 0x00 0x00 0xNN 0x0000

Where NN is the message length - dependent on the Modem ID string length.

Message body:

Hex

Description

8 bytes

Amount of data transmitted over the wireless link (MB) in little endian byte order

8 bytes

Amount of data received over the wireless link (MB) in little endian byte order

<= 11 bytes

Modem ID in ASCII

Note: ULCP binary messages should not be used for local serial report mode 1 and 2 in applications where

timed message delivery is critical.

9.16 Message Type 98, ULCP binary format, Digital Inputs plus GPS data

Header: 0x62 0xSS 0x06 0x00 0x00 0x1c 0x0000

Message body: