Specifications

Open CTM (Revision D)

156

Report Messages

hh is the message checksum

Examples:

EV-DO:

$PCTM,-87dBm,-100dBm,16422,1,3,1,96.1.5.204*0B

HSPA (firmware version R1.3.0 and above only):

$PCTM,-90dBm,-0dBm,0,0,6,1,10.163.78.249*33

Wi-Fi:

$PCTM,IEEE802.11abg,cypress ,00:24:A5:AD:61:4F,18dBm,70/70,-22dBm,n/a

dBm,192.168.100.202*53

9.6 Message Type 31, PDATA

Proprietary NMEA message containing the values of data transmitted and received over the wireless data

link. The total data usage in MB can be determined by adding the reported value of data transmitted with

the reported value of data received.

Message format is:

$PDATA,xxxxxxxxxxxxxxxxxxxx,yyyyyyyyyyyyyyyyyyyy,zzzzzzzzzzz*hh<CR><LF>

Where:

xxxxxxxxxxxxxxxxxxxx is the amount of data transmitted over the wireless link (MB)

yyyyyyyyyyyyyyyyyyyy is the amount of data received over the wireless link (MB)

zzzzzzzzzzz is the modem’s ID as set by the user (maximum 11 characters)

hh is the message checksum

Example:

$PDATA,0,9,09604204991*59

9.7 Message Type 40, ID=

This is a proprietary ASCII message containing the modem’s phone number, PAD port, serial port baud

rate and PAD type.

Message format is:

ID=pppppppppp,nnnnn,bbbbbb,ttt

Where:

pppppppppp is the modem’s 10-digit phone number