Specifications

Open CTM (Revision D)

149

Command Reference

The remote server must also be configured to respond to messages from the modem.

The message format sent from the modem is as follows:

$PPEN,0013A200402CB498,13,PANIC*03

The acknowledgment that the modem expects from the server is as follows:

$PPQ,PAN,0013A200402CB498,13,ACK*36

The 16-digit hex number following the PPEN message is the Pendant ID and is unique to each pendant.

Examples:

1. Configured as modem type acknowledgment

cmd wpanacktype m

2. Configured as server type acknowledgment

cmd wpanacktype s

return to list of commands

wpanadddev xx-xx-xx-xx-xx-xx-xx-xx

Adds a WPAN device ID to the Chameleon Modem’s registered WPAN devices list. Up to 16 WPAN IDs can

be entered.

xx-xx-xx-xx-xx-xx-xx-xx WPAN device ID (hex digits), hyphens are optional

Using wpanadddev without a device ID, queries all WPAN devices IDs currently registered in the

Chameleon Modem.

Note that the ID of FF-FF-FF-FF-FF-FF-FF-FF will allow any pendant to talk through the modem.

Example:

cmd wpanadddev 00-13-a2-00-40-08-58-5e add WPAN device with this ID to the registered devices list

cmd wpanadddev 0013a2004008585e above example with optional hyphens omitted

cmd wpanadddev queries all devices IDs

A cmd save is required for this command to take effect.

Note that the modem needs to be power cycled for the new settings to take effect.

return to list of commands