Specifications

Open CTM (Revision D)

145

Command Reference

If specific DNS nameservers are to be used, this setting should be disabled. DNS nameserver IP addresses

can be added from the main Network web page under the lan DNS servers section by entering the DNS

nameserver IP address in the text field, clicking on the Add button, followed by clicking on the Save

Changes button.

x = 0 disable obtaining DNS nameserver IP addresses from the carrier

x = 1 enable obtaining DNS nameserver IP addresses from the carrier (default)

Examples:

1. Disable obtaining DNS nameserver IP addresses from the carriere.

cmd usepeerdns 0

This command takes effect immediately.

return to list of commands

user n

Sets the username used for wireless network access via simple IP. This is often in the format of [phone

number]@[carrier].com.

n a maximum of 40-character alpha-numeric username

A save operation is required.

Examples:

cmd user 6045551234@… sets the username to 6045551234@…

cmd user displays the current username used for wireless network access via simple IP

A cmd apply followed by a cmd save are required for this command to take effect.