Specifications

Open CTM (Revision D)

142

Command Reference

A cmd save is required for this command to take effect.

See also: telnetpswd, telnetport

return to list of commands

timesync t

Set the period in seconds when the modem's system time and the power management controller's time

are synchronized with one or more external sources:

Valid GPS (gpstime)

Network time protocol (NTP) built-in client (ntptime)

Cellular network time (networktime)

t = 0 to 65535 synchronization period in seconds (default: 3600 seconds)

A cmd save and a power cycle are required for this command to take effect.

Examples:

1. Update system time and power management controller time as fast as possible

cmd timesync 0

2. Update system time and power management controller time every 10 seconds

cmd timesync 10

See also: gpstime, networktime, ntpserver, ntptime

return to list of commands

8.1.17 “U” Commands

univwd <mode> <url>/<report>

Configure the Universal Watchdog.

mode = 0 disabled

mode = 1 detect increase in received packets.