Specifications

Open CTM (Revision D)

136

Command Reference

The 6-digit lock code is used by the modem’s embedded module to compare against the pre-loaded 6-

digit CSL. This number will be provided by the service provider at the time of service activation.

nnnnnn 6-digit lock code

Example:

cmd spc 123456 set the modem’s SPC to 123456

A cmd save is required for this command to take effect.

return to list of commands

speedth ss t

Sets the speed threshold for automatically enabling the RF module of the modem when it has been

previously disabled.

Turns off output #4 when it has been previously turned on.

The RF module of the modem is disabled by using an external switch box(supplied by Cypress Solutions)

connected to the modem when the modem is used in areas sensitive to RF interference.

The defaults are 30 km/h for ss and 3 seconds for t.

If ss and t are omitted, the current speed threshold will be queried.

ss speed threshold(kph)

t time (seconds)

Example:

cmd speedth 50 5 set the RF module of the modem to automatically turn on when the speed reaches 50

km/h for at least 5 seconds

cmd speedth queries the current speed threshold conditions

A cmd save is required for this command to take effect.

return to list of commands

sshkey [dss/rsa]

Generate a SSH public/private key pair.

dss Generate a 1024 bit DSS key pair

rsa Generate a 1024 bit RSA key pair

Example: