Specifications

Open CTM (Revision D)

135

Command Reference

A cmd save is required for this command to take effect.

return to list of commands

snfflush

Flushes and resets store and forward NVRAM.

return to list of commands

snflog n

Used to display the contents of the store and forward log locally thru a serial console, and the status of

the log entries. The log can contain up to 3000 records.

This is a read only command.

n = 1 to 3000 number of store reports to be displayed

The number of stored reports and their status can be queried by entering snflog without parameters.

T:t where t is the total number of stored reports

F:f where f is the number of reports forwarded

N:n where n is the number of reports not yet forwarded

Examples:

cmd snflog 100 displays the first 100 SnF log entries

cmd snflog displays the SnF log status

Note: snflog may erroneously report number of forwarded messages as 1 in cases where number of

forwarded messages is actually 0. When network coverage resumes, all packets will be forwarded.

return to list of commands

spc nnnnnn

This command is used to enter the modem’s CSL (Client Subsidy Lock) as part of the network activation

commands prior to loading the modem’s 10-digit phone number using the dir command.