Specifications

Open CTM (Revision D)

134

Command Reference

Note: SMS features are only available for specific manufacturer, RF modules, cards or devices. Please

contact Cypress Solutions for a complete list of products that support SMS functionality.

The phone number is not saved in non-volatile memory.

pppppppppp phone number which the text message will be sent to. For long distance calls, a “1” needs to

be added in front of the phone number.

The current settings can be queried by using the smsto command without parameters.

Examples:

cmd smsto 1235551212 sets the phone number to send the SMS

cmd smsto returns the phone number this command is set to

return to list of commands

smsview

Query’s the message entered via smstext command.

Note: SMS features are only available for specific manufacturer, RF modules, cards or devices. Please

contact Cypress Solutions for a complete list of products that support SMS functionality.

This is a read only command.

Example:

cmd smsview returns the text message to be sent

return to list of commands

snfdelay [n]

This command sets the store-and-forward delay time. The delay time is the number of seconds the

modem must have a good quality RF connection before stored messages are forwarded. Valid range is 1

to 65535 seconds. The default is 20 seconds.

Note that message forwarding may not occur exactly at the snfdelay interval specified, and stored

messages will only start forwarding when network conditions are deemed acceptable. Example:

1. Set the delay time before forwarding SNF data to 60 seconds

cmd snfdelay 60